Cat 5E UTP Patch Cable

Constructed of Hign-Performance Cat 5E cable suitable for 1000MHZ High-speed data applications, gigabit ethernet, fast ethernet, 155Mbps TP-PMD/CDDI . Boots offer cable-end color ID, strain relief and RJ45 plug tab protection from snagging on cables or connectors when routing in ceiling and under floors, suitable for indoor installations .

Features and benefits

6-50 micron RJ-45 staggered gold plated connectors . 
Fitted with strain relief boots 
With or without reports made to the order 
100% tested wiring sequence and continuity 
Excellent attenuation and crosstalk characteristics 
With or without reports made to the order 
Connector with staggered pin configuration to limit cross talk . 
Exceed Category 5E requirement . 
They are available in a variety of the lengths

Cat 5E UTP 24-port patch panel

The patch panel is a 19 inch rack mountable RJ45 jack panels . Each panel has cutouts that accept virtually as snap-in jacks, the kits includes the new icon labels with plastic holders that you mount on the front of the panels for easy port identification . Blank anodized panels can be mounted directly for easy port identification . Blank anodized panels can be mounted directly to an EIA standard 19 inch relay back or cabinets . 

Features and benefits 

Design to mount to any standard 19" rack or cabinet  
24-port Cat 5ePatch panel  
Front surface is uninterrupted by screw heads for a clean apperance  
Bold port numbering enables quick and ready identification of outlets  
Space saving ,high-density 1U (24 port )  
Black electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI/TIA/EIA 568B.2 .  

Use keystone jacks and keywtone inserts to configure your panel to accommodate a variety of schemes .  
Sturdy Aluminum Plate around RJ 45 Jacks  
Phosphor bronze with 50 micro inches gold plated  
Available with T568A/B wiring pattern and meeting the requirement of Cat 5E standard  
Color Coded TIA/EIA 568A(international) and 568B(AT&T standard) wiring for easy installation  
Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires  
Metal sheet: Corrosion resistant streets  
Plastic: fire self -extinguish high impact plastic

Cat 5E UTP keystone jack

Horizontal style Cat5E 180 degree keystone jacks, it features dual color-coded wiring label with both T568A/B wiring pattern. Rear termination field for easy termination of a jack while installed in a wall plate, surface mount boxes and blank patch panels for a wide of applications .
Features and benefits

Available in Cat 5E T568A/B wiring schemes, meet or exceed TIA/EIA Cat5E requirements 
The new design allows high density solution 
The V style IDC contacts flex not fatigue when terminated 
Termination caps prevent wire from dropping off 
Housing: high temperature thermoplastic 
Compact jack design, 8 positions and 8 conductors 
Contract: phosphor bronze , phosphor bronze with 6 to 50 u" gold plate 
Accept 22-26 AWG solid with a insulation diameter of 0.4 - 0.6 mm 
Easy to be terminated Low attenuation loss and high return loss 
High reliability and superior performance 
Available in different colors

Cat 5E UTP solid cable

Application: This 4-pair Category 5E cable is tested for power sum next, elfext, delay skew, propagation delay and any other criteria as specified in the emerging standard . Applications can include voice, ISDN, ATM155 and 622 Mbps, 100Mbps TPDDI, fast and gigabit ethernet, shielding protects against EMI/RFI interference .
Features and benefits

UL-Certified 
4 pairs twisted pair cable 
Application: Gigabit Ethernet ,155 Mbps ATM 
All cables meet or exceed the requirement proposed by TIA /EIA 568 B .2 ,ISO/IEC 11801 Category 5E 
24AWG (0.51 mm ) insulated copper conducts with PVC jacket 
Twisted pairs are brightly colored and distinguished at a glance 
Performance characterized to 350 MHz 
Ultra smooth jacket makes this cable easy to pull in tight spaces 
1000 FEET, packaged in full boxes